LUBRIFIANT

Liquide de Frein DOT 3

BRAKE FLUID DOT 3 is a borated glycol-ether technology hydraulic brake fluid providing optimal protection of braking systems against overheating and corrosion. Compatible with light commercial vehicles and passenger cars equipped with DOT 3 hydraulic systems. This fluid, with optimized viscosity and low risk of vapor formation, is specially formulated to extend the service life of the braking system.

Technical file

Available in

FMVSS Nº 116 DOT3

ISO 4925 Classe 3

JIS K2233

SAE J1703

Before use, it is important to consult the vehicle maintenance manual. Replacement must be carried out according to the manufacturer’s recommendations.
BRAKE FLUID DOT 3 ensures the safe and reliable operation of hydraulic braking systems in motor vehicles and can be safely mixed with other fluids meeting the DOT 3 specification.
BRAKE FLUID DOT 3 is not compatible with mineral oil-based fluids and must not be mixed with them.
It is formulated:
- For traditional vehicles without ABS systems
- For hydraulic clutch systems

Do not store products at temperatures above 60°C. Keep away from sunlight, freezing conditions, and temperature fluctuations. Due to the highly hygroscopic nature of DOT 3, HDPE packaging and absolute protection against moisture are essential to preserve the boiling point. If outdoor storage is unavoidable, lay the drums horizontally to prevent water infiltration and avoid any contact with mineral oil-based products.

Excellent performance at low temperatures
Good viscosity-temperature behavior
Ensures good lubricating power of all moving components of the hydraulic braking circuit
Maximum thermal stability
Extremely high dry and wet boiling points